Piston Water Pump

Publication Number T-114 Go back to AT_Sourcebook

Abstract

This document gives schematic drawings of the assembly and operation of a wind powered water pump. The drawings are accompanied by a list of parts and materials used in the pumps manufacturing.

Publisher

Brace Research Institute
MacDonald College
McGill University
Ste. Anne de Bellevue 800
Quebec, Canada
H9X 1CO
1977

Installation

Assembly

Piston and Piston Rod

Washers and Piston Head

Operation

Parts and Materials

List of Parts and Materials

  • 36 - Nut Bored at 8mm
  • 34 - Round HD-Screw 4mm
  • 32 - Nut 8mm
  • 30 - Iron Rod 8mm
  • 28 - Steel Plate 4mm
  • 26 - Steel Plate 4mm
  • 24 - Rubber Washer 5mm
  • 22 - Rubber Washer 5mm
  • 20 - Black Steel Plate 4mm
  • 18 - Black Steel Plate 4mm
  • 16 - Coupling 90mm/100mm
  • 14 - Galv. Pipe 33mm/42mm
  • 12 - Galv. Pipe 80mm/90mm
This article is issued from Appropedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.