Help:Laptop page guidelines

Add an appropriate category to the page, for example Category:Dell. If there is no category for your vendor, create one.

The page name should be "Vendor model number", for example "Lenovo ThinkPad X1 Carbon".

Do not create a redirect which just omits the vendor name, for example "X1 Carbon" or "ThinkPad X1 Carbon".

Do not duplicate content from the general Laptop guidelines. A section just containing e.g "The webcam of this device works fine" will not help anyone, so do not add a section if there are no special instructions for it. Also avoid mentioning desktop environment or window manager specific content. This also applies to other things that are documented in the ArchWiki, e.g do not include instructions on how to flash the archiso to a USB-stick, just link to the page containing the instructions. This will result in less maintenance required.

Add a table with style="float: right;" at the very beginning of the page with the following columns:

1. Hardware
   1. It should contain the short name of the part, like "Bluetooth" or "Fingerprint reader".
   2. Only append the name of the vendor to the part if there are more than one. A common example for this would be more than one GPU (see table below).
   3. Consider running hw-probe to make the full set of hardware known to the Linux Hardware Database.
2. PCI/USB ID
   1. It should contain the PCI or USB ID of the part, if available. This is important because some laptops may have varying hardware.
   2. lsusb shows the USB ID by default, but lspci must be run with -nn in order to obtain the PCI ID of devices.
      1. If there is a PCI/USB ID without a name, consider contributing the part to the PCI ID repository or USB ID repository respectively.
   3. If there is no applicable PCI/USB ID for this device, leave the column empty. Do not put Template:-, dashes or anything else into the column.
3. Working?
   1. It should contain Template:Yes or Template:No. If these are not applicable, use Template:Y and a fitting, short description of its status, like "Untested" or "Partial".
      1. Use "Partial" when the part still does not work correctly with applied modifications.
   2. Use Template:Yes even if you need to install an external driver or if configuring this with device-specific parameters enhances its functionality.

{| class="wikitable" style="float: right;"
|-
! Hardware !! PCI/USB ID !! Working?
|-
| Bluetooth || {{ic|1234:abcd}} || {{Yes}}
|-
| Webcam || {{ic|abcd:1234}} || {{No}}
|-
| GPU (Intel) || {{ic|8086:0000}} || {{Yes}}
|-
| GPU (NVIDIA) || {{ic|10de:1111}} || {{No}}
|-
| Other part || {{ic|0000:aaaa}} || {{Y|Untested}}
|}

Since all laptop pages should contain a hardware table floating right, the use of Template:Related as described in Help:Style#Related articles box is substituted with using only the "See also" section or direct links inside relevant sections to avoid right-floating elements clashing with each others.

This section should contain information that is necessary to install Arch Linux on this device. This includes, but is not limited to:

• Kernel parameters
• Important firmware settings (also see #"Firmware" section)
  • This does not include obvious settings like changing the boot device.
  • It is encouraged to link to relevant posts in the forums, like this example post focusing on an issue with Dell devices.
• If a device needs a special firmware for installation, for example an AUR package for network connectivity, make the requirement prominent.

Omit this section if there are no quirks that need to be addressed.

To help disabled users install Arch Linux on the device, add some accessibility info. This includes, but is not limited to:

• The appearance of the firmware. Consider settings required to change in order to boot an official Arch Linux install medium.
  • Newer firmware interfaces may be more difficult to parse with OCR software on phones, which blind users frequently use as daily tools. If there is an option to revert the default design to the "classic" design, add instructions for it.
  • Some firmware even require the usage of a mouse and/or is overly complex. If it is not possible to change settings without eyesight, add a note describing this. For example:
  • Some firmware interfaces may use radio buttons and tightly packed menus extensively, which might prevent users with Parkinson's disease from changing certain settings.
• Refer to a relevant section of the official manual (see #"See also" section) for your device that contains a list of all the shortcuts needed to navigate the firmware and to trigger certain actions, like changing the boot device.
  • If such a manual does not exist, you can add a list to the section instead.
• Some devices may have a diagnostic LED, which visualizes beep codes. This is useful for deaf users.
  • Add a note if there is only a diagnostic LED, but no beep codes.

The page should contain a short note describing the fwupd support for this device.

A page should include a firmware section, when there is special behavior the user should be aware of. This includes, but is not limited to the following:

• Certain optional firmware settings that can enhance the compatibility of this device
• Firmware quirks that can impact the installation
• Secure Boot information
  • Do custom keys work well on this device?
  • Are there any special firmware settings one needs to change for this?
  • Are there any other specialties the user should be aware of?
• Does the firmware store recovery images or logs in a special path? This is important to know when choosing the size of an EFI system partition.
• Sometimes it is crucial to update the firmware because it fixes critical bugs. If there are any important firmware updates, mention it in this section.

Add a table with the following columns:

1. Key
   1. The key one needs to press. They usually start with
2. Visible?
   1. Use Template:Yes or Template:No, depending on whether tools like can see this key.
3. Marked?
   1. Use Template:Yes or Template:No, depending on whether the physical key has a symbol on it, which describes its function.
4. Effect
   1. Usually, function keys emit a key or the firmware does something when the key is pressed.
   2. Specify the key when a key is emitted, like XF86MonBrightnessDown.
   3. A key may have a special effect which should be mentioned, like hard blocking network devices.
   4. Do not add desktop environment/window manager specific instructions.
   5. There are some keys that will be bound by systemd-logind by default, which should be marked (see table below).

# systemd-inhibit --what=handle-suspend-key sleep 1h

This section should contain helpful links which include, but is not limited to the following:

• Related other external wiki pages, like the ThinkWiki.
• Official manual pages provided by the manufacturer, which can be helpful when debugging firmware issues.
• certification.ubuntu.com pages, which can be a useful source for PCI/USB IDs and hardware variations.
• A link to the Linux Hardware Database probe, which provides information about compatibility and PCI/USB IDs.