Session lock

There are numerous utilities to lock the screen of a session. But it is important to note that the utility to use is highly dependent on the environment you are in, either the virtual console, or a specific display server (Xorg or Wayland).

See List of applications#Screen lockers.

By environment

Virtual console

You can use vlock or physlock to lock a virtual console.

Xorg

There are many ways to lock the session under Xorg, so this section is likely to be incomplete. Some methods however include:

Most desktop environments come with some way to lock the session.

Wayland

You can lock the session with swaylock or .

Triggering the lock

You can lock a session using different methods:

The last point (triggering a lock from an event) is the trickiest, because you can do it in one of two ways:

  • get the action trigger to execute your lock, then to execute the initial action.
  • from the event trigger, add the lock to the event chain. So far this can only be done using systemd.

Zsh

To execute a command after terminal inactivity, you can use the TMOUT environment variable.

You can combine it with a trap on the ALARM signal to execute the lock. Without a trap, it will just terminate the shell.

You might want to detect if you are in a graphical environment, otherwise your GUI terminals might start disappearing without you understanding why.

xss-lock

 
is triggered by one of two things:

The advantage of this is that you can control a lock issued manually, by inactivity, and by a suspend command at the same place.

To execute an action on one of those events:

$ xss-lock <locker-utility>
systemd events

By default, xss-lock subscribes to suspend, , , and with appropriate actions (run locker and wait for user to unlock or kill locker).

You can prevent xss-lock from being triggered by suspend and using .

You can trigger a manual lock using .

DPMS

To configure DPMS signaling timeout:

# Trigger screensaver after 10 minutes of inactivity
xset s on
xset s 600

DPMS signaling can also be configured in in the Monitor section.

Using DPMS signaling, you can set a second timer, for example to notify the user or to dim the screen. For example (from ):

# Dim the screen after three minutes of inactivity, lock the screen two minutes later using i3lock:
xset s 180 120
xss-lock -n dim-screen.sh -- i3lock -n

An example script can be found in .

xautolock

 
$ xautolock -time 12 -locker "systemctl suspend" -detectsleep
Note: xautolock has restrictive timer limits:
  • 1 min to 1 hour for time
  • 10 min to 2 hour for killtime
It might be necessary to add -detectsleep to prevent xautolock from locking the session after resuming. One nice feature of xautolock is the corners.

swayidle

 
listens for idle activity from the Wayland compositor, as well as systemd events, and executes commands accordingly. See Sway#Idle.

D-Bus notification

Using , or the action in , you can notify the system through DBUS that you want to lock. This notification can then be processed, for example by xss-lock.

Inactivity

In , you can configure the to . This will trigger a DBUS notification, that will have to be processed (for example by xsslock) to lock the session.

Note that this is for a global system (so this is not ideal for a multi user environment).

Note also that "this requires that user sessions correctly report the idle status to the system".

Before suspend or hibernate

You can use a Sleep hook.

To enable it for a certain user, enable sleep@Username.service.

Lid closing

You can use the action using the related ACPI event.

See also
This article is issued from Archlinux. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.