Introduction

This guide will teach you how to replace a broken windshield wiper for a 2014 Infiniti QX50. The steps are short and easy to follow with pictures that relate to each step. Aside from pictures, the steps are not lengthy. In the end, it should take you about five to ten minutes to change your windshield wiper. I hope you found this guide useful!

  1. NQ6HwxSg5gGn2eLv
    NQ6HwxSg5gGn2eLv
    6u1kUrWeMinMmqVx
    • Go to the driver’s side windshield wiper.

    • Pull the driver's side windshield wiper away from the windshield.

  2. TEcrpMiyaJa3LSJL
    • A tiny clip is holding the blade in place. Push the clip up towards the arm of the wiper and push up.

  3. ysBLXVjMrd2FuATi
    ysBLXVjMrd2FuATi
    FsQTlkWQJqKAF6vd
    jGpGLBZXyuxcUtW1
    • Completely disconnect the old blade by pushing it a few inches from the arm.

  4. dOeYwhCKVaRvZQHf
    dOeYwhCKVaRvZQHf
    2UbxhqZEjnBcreUL
    • Position the new blade so the hook is toward the wiper clip.

    • Place the hook over the top of the attachment and lock the blade into place by pulling it towards the end of the arm.

    • Pressure should be applied so the blade can latch onto the hook.

Marissa

Member since: 22/03/21

133 Reputation

0 comments