Introduction
This guide shows you how to replace the Beats Studio 2 Wireless headband, which is required when one or both earphones will not stay in the proper position. Sometimes the headband will become loose after a period of time. Replacing the headband should remedy the situation.
Tools
-
-
Slide the headband down on one side to reveal the two screws under the silver "Studio" label.
-
Use a T5 screwdriver to remove the two screws securing the headband pieces.
-
Slide the headband down on the other side to reveal the two screws beneath the "Wireless" label.
-
Use a T5 screwdriver to remove the two screws securing the headband pieces.
-
-
-
Slide the headband away from the silver "Studio" and "Wireless" silver bands.
-
Peel the rubber interior layer off of the headband to remove it.
-
-
-
Use a nylon spudger to undo the tabs connecting the foam interior of the headband to the outer shell.
-
Remove the foam interior part of the headphone.
-
To reassemble your device, follow these instructions in reverse order.
