Introduction
Use this guide to replace the battery in your Beats Studio3 Wireless headphones (model number: A1914).
The battery helps the Beats Studio3 Wireless headphones to power on. It's designed for long battery life of up to 22 hours for all-day. A failed battery will cause your Beats Studio3 Wireless to not turn on. You can take a look at the bottom right ear pad to check if the five lights are on. In some cases, your Beats Studio3 Wireless will have faulty charging due to a deteriorated battery.
Parts
-
-
Use a pointed nylon spudger to remove the center circular panel on the right side of your device.
-
-
-
Using a pointed nylon spudger, remove the tab located on the inner part of the headband labeled "R."
-
Place the nylon spudger in between the side panels and push inward going from bottom to top to separate both sides of the panel.
-
-
-
Place the nylon spudger underneath the battery, push inward and separate the battery from the inside.
-
-
-
Use a nylon spudger to lift up the glue sticking the wires down.
-
Use a nylon spudger to lift the connector to disconnect the battery.
-
To reassemble your device, follow these instructions in reverse order.
