Black and Decker JS660 Angle Knob Replacement

Written By: Andrew Khouri
  • Comments: 0
Black and Decker JS660 Angle Knob Replacement

Difficulty

Moderate

Steps

4

Time Required

20 - 25 minutes

Introduction

This guide will give users a step by step on how to replace the angle indication knob on your Black and Decker JS660 jigsaw.

  1. poaf5emkBwBqUCpn
    poaf5emkBwBqUCpn
    VWAeK3xYclpFaipA

    • Unscrew the nine screws to open up the jigsaw

  2. X522ZVbqMWsv1bWg

    • Unscrew the base by unscrewing the two shown in the picture.

  3. WPZURTvmkAJEqPEH
    WPZURTvmkAJEqPEH
    K4OOhqssM2ffFDlV

    • The Jigsaw base will now be off. With the new base simply do the reverse order of steps.

    • Assemble the base on a steady surface.

  4. Vp66AsBCOMOBeDAi
    Vp66AsBCOMOBeDAi
    yIZDfYOVm2dou2YM
    o1jHn6kLOYyc3bQs

    • As soon you disassemble the device, you can see the angle knob is not attached to any screws.

    • Remove the angle knob from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Andrew Khouri

Member since: 08/02/16

468 Reputation

0 comments