Blackberry RIM 7250 Front Housing Replacement

Written By: Noah Eckert

Comments: 0

Blackberry RIM 7250 Front Housing Replacement

Difficulty

Easy

Steps

Time Required

3 minutes

Introduction

This guide will be useful in replacing the front housing for the Blackberry RIM 7250. For this guide, you will need a plastic opening tool and a Torx #6 screwdriver head.

Tools

Step 1

Push the release button down and away from the device.
Slide the cover off toward the bottom of the device, revealing the battery compartment.

Step 2

Place your finger in the groove next to the battery.
Lift your finger up to eject the battery from the battery compartment.

Step 3

Remove the battery from the compartment.

Step 4

Remove the four 10.7 mm Torx T6 screws.

Step 5

Remove the two 5 mm Torx T6 screws.

Step 6

Hold the phone with one hand, with the bottom facing toward you.
For both clips, insert the plastic opening tool and push away from you.
You will hear a clicking sound for each clip that is released.

Step 7

Grab the back housing from the bottom and lift the housing away from you.

Step 8

Place your thumb on the bottom rectangle and your index finger on the top rectangle.
Squeeze your fingers together to release the internals from the front housing.