ClickN Kids Tablet Battery Replacement

Written By: Kevin Finney
  • Comments: 3
ClickN Kids Tablet Battery Replacement

Difficulty

Difficult

Steps

4

Time Required

25 - 45 minutes

Introduction

The Clickn Kids Tablet (Android CK07T-PK-8) is a toy beloved by many children, but when the battery dies it often ends up getting tossed away or forgotten. The battery is a vital part of the tablet and it is not useable without it. A tablet with a broken battery may have a black screen or die quickly when in use. By following these steps, you can extend the life of your Clickn Kid tablet.

In order to replace the battery, you will need experience in soldering, patience and a careful touch. Removing batteries can carry the risk of battery acid leakage, so please ensure not to bend battery more than necessary. To find out more about soldering, please visit the link below.

How To Solder and Desolder Connections

  1. NjSbj2BoYyS4OCMb

  2. XgbF2ktCcFAYOJKO

    • Using the iFix it opening tool, pry battery apart from back side of tablet.

    • The battery is connected to the back side by a strong adhesive.

    • The battery may bend during this process.

    • Be careful not to allow the battery to bend any more than necessary. Battery acid leakage is possible.

    • Be careful not to damage the wires or the black tab attached to the battery.

  3. MlHKLErnxyHRVBVB
    MlHKLErnxyHRVBVB
    DWCsLx3eYppxHVKF
    h1TDIoaYYGIWqkGR

    • Gently remove tape from the side of the battery connecting to wires and circuits.

  4. 1bs2EryhDTBPtYuN
    1bs2EryhDTBPtYuN
    ofRMEEeoVNf4AR2H
    MsQAdO1vTbNUQTFW

    • Desolder wires connecting battery to motherboard, using contact points found on motherboard.

    • Have someone who is skilled in soldering to perform this step.

    • Be careful not to destroy the motherboard or other parts of device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kevin Finney

Member since: 22/03/15

553 Reputation

3 comments

Como puedo conseguir el repuesto de mi tabletas epik

Reyshaliz -

A little then moderate skill is necessary if you are somewhat mechanically inclined shouldn't be too problematic. But as far as this gentleman's directions and steps perform the task with no problems and tablet works now. Thank you Kevin Finney and three others my four-year-old daughter Hazel is happy again thanks to you.

Collins Hill

Great Smoky Mountains , TN.

Elivia Hill -

I think these are great instructions for fixing this issue!

If you'd be interested in going a step further…I've been trying to find out how to safely remove the charge port! I know how to solder the replacement onto the board but I can't confirm the best way to detach the old port!?

My god daughter would appreciate another video! :)

JenBcute -