Introduction
If you have been using your Corsair Dark Core RGB Pro SE mouse for a while and noticed that it's becoming unresponsive or the clicks are not working properly, it could be due to worn-out mouse nano-switches. This guide will provide you with step-by-step instructions on how to replace the mouse nano-switches of your Corsair Dark Core RGB Pro SE.
Tools
-
-
Use an iFixit opening tool to gently pry up the right and left click buttons on the top cover of the mouse until they pop out of place.
-
-
-
Using a plastic opening tool, gently pry up the side button assemblies until they pop out of place.
-
-
-
Remove the screws that hold the circuit board in place using a Phillips #0 screwdriver.
-
Gently lift the PCB and set it aside.
-
To reassemble your device, follow these instructions in reverse order.