Corsair Dark Core RGB PRO SE Scroll Wheel Replacement

Written By: Kelly ventura
  • Comments: 0
Corsair Dark Core RGB PRO SE Scroll Wheel Replacement

Difficulty

Moderate

Steps

10

Time Required

25 minutes

Introduction

Use this guide to replace the scroll wheel when it starts to glitch when scrolling, or unresponsive. Follow step by step to replace the wheel.

  1. CvZaRa1NKsfwDMiI

    • Start off by removing the front of the mouse and put it aside.

  2. wglRIPLJDqIuJsD3
    wglRIPLJDqIuJsD3
    TkLNYwQxHbgWoYNm

    • Then remove the left and right click buttons by pinching the laches together and carefully removing them.

    • then remove the two screws with Phillip #00.

  3. ZjIK1yU5xHiOVcyE

    • Flip the mouse over and remove the adhesive carefully.

    • Then remove the two screws using torx T5

  4. BlC3HpBZRnovxto1

    • Carefully remove the top and put it aside.

  5. ognGddckVpKQUjuQ

    • Remove the 4 screws with Phillip #00

  6. UCcFDk3DOMEUxBUa

    • Remove the two black tabs by lifting them carefully and removing the white slip.

    • Carefully remove the green slip by moving the tabs and holding it outwards.

  7. VLlyvUgkFScJIEDP

    • Remove the battery (optional).

  8. epHf4NhvKi13xcou

    • Remove the screw and remove the side button.

    • Right underneath is another screw to remove for the second side button.

  9. qsYle5WnCu6Lp4p3

    • Remove all 3 screws around the scroll wheel to be able to detach the tab holding the scroll wheel.

  10. Ppwf15fP3uDMfucv
    Ppwf15fP3uDMfucv
    lliXu6FidDeq5Oom
    HTXvRjWeM2QvwB1S

    • Remove it from the mouse.

    • Put the mouse aside and remove the black tab on the side of the scroll wheel.

    • Right after removing the scroll wheel from the plastic tab and from there, you can take the scroll wheel off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kelly ventura

Member since: 09/02/23

181 Reputation

0 comments