Introduction
Intro
-
-
Flip laptop onto backside up
-
Remove any usbs, hubs, or sd’s
-
Remove the screws
-
The blue circled screws are stand-off screws, they shouldn’t come out. Keep unscrewing until each of them start to make a clicking noise
-
The red circled screws are normal, they are all the same size and should come out.
-
-
-
All the screws should be off except the stand-off screws
-
Slide a pick or card around the computer lid
-
Lift the lid off using the card near the spine/hinge of the laptop
-
-
-
The lid should come back off
-
Find the battery cable (near the bottom right)
-
Lift off a bit of the cable cover and use a tool to disconnect the cable
-
Disconnect the cable by pushing the cable out
-
-
-
Unscrew the battery from the laptop
-
Use a card or pick to detach the battery
-
The battery isn’t glued in, it should be free
-
To reassemble your device, follow these instructions in reverse order.
