Dell Inspiron 14-7437 Base Cover Replacement

Written By: Travis Connolly
  • Comments: 0
Dell Inspiron 14-7437 Base Cover Replacement

Difficulty

Easy

Steps

2

Time Required

1 minute

Introduction

This is a Prerequisite guide for all work done inside of the laptop.

  1. mpGPNSLQOiqbvMRp
    mpGPNSLQOiqbvMRp
    LBUyK4XiwHXrTVNx

    • Power off your Dell Inspiron 14-7437 before disassembling.

    • Remove the eight 4.5 mm screws on the back panel of the device using the Phillips 1 Screwdriver.

    • The two 4.5 mm screws in the center under the rubber mount cannot be removed, but can be loosened.

  2. T21Te6yIVwcTQtkt
    T21Te6yIVwcTQtkt
    Is5ScOJQsJxf4HX6

    • Pry open the back cover using a spudger and slide it along the under the cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Travis Connolly

Member since: 09/03/16

330 Reputation

0 comments