Introduction
-
-
Remove the 4 mm screw that secures the optical drive bracket to the optical drive using a Phillips #00 screwdriver.
-
-
-
Eject the optical drive by pressing the eject button.
-
Push out the optical drive bracket using the iFixit opening tool.
-
-
-
Remove 13 8 mm screws from the bottom of the device using a Phillips #00 screwdriver.
-
Remove the single 4 mm screw from the bottom of the device using a Phillips #00 screwdriver.
-
Remove the three 4 mm screws from the optical drive slot using a Phillips #00 screwdriver.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
