Dell Latitude E6410 Cooling Fan Replacement

Written By: Stephen Tate
  • Comments: 0
Dell Latitude E6410 Cooling Fan Replacement

Difficulty

Moderate

Steps

6

Time Required

25 minutes

Introduction

This guide will step you through the process of replacing your cooling fan.

  1. iGPALFCTCc5UnZuP
    iGPALFCTCc5UnZuP
    bIJAtHJWZYmkKufU

  2. A1yZDgfCYJJkaZNs
    A1yZDgfCYJJkaZNs
    CTLkbT1xhIjeyGGC

    • Remove the following 5mm screws.

    • Loosen the middle 5mm screw.

  3. R3uYCPMhpv4rH4Qg

    • Remove the back cover by sliding it downwards.

  4. UWWEeQZRLsLnXUGE
    UWWEeQZRLsLnXUGE
    jGTGaOLH4WQB1H6n

    • Unscrew the following 2mm screws.

    • Remove the fan case.

    • Do not pull hard enough to break the wires connected to the motor.

  5. XUScJOJEGPihZSGw

    • Unscrew the 1mm screws on the fan case.

  6. MIcLtWuTBOEEQysh

    • Remove the fan by pulling it away from the motor.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Stephen Tate

Member since: 06/11/17

835 Reputation

0 comments