Introduction

Replace Hard Drive

  1. ZvPHZMTMRHNrgVZS
    • Turn off your computer. Then, disconnect your computer and all attached devices from their electrical outlets.

    • Close the display and turn the computer upside down on a flat work surface.

    • Slide the battery-bay latch release on the bottom of the computer and remove the battery from the bay.

  2. enVSXGyPdRAQXlvo
    • Turn over the computer and remove the two M3 x 3 - mm screws.

    • Slide the hard drive out of the computer.

Conclusion

To reassemble your device, put a new hard drive in the drive bay and follow these instructions in reverse order.

Johnathan Hammond

Member since: 28/02/18

44499 Reputation

0 comments