Disassembling Sony Clie PEG-NR70 The Case

Written By: Daniel Soski
  • Comments: 0
Disassembling Sony Clie PEG-NR70 The Case

Difficulty

Very easy

Steps

3

Time Required

1 - 2 minutes

Introduction

  1. GPUDvUByxNvD3LIt

    • Unscrew the 1.9mm screw located at the top of the device with a Phillips #00 screwdriver.

    • It may be helpful to set up a piece of paper to keep track of where removed screws came from.

  2. PJ5PvWxEIibJcG2C

    • Unscrew the 2.5mm screw located on the left side of the device with a Phillips #00 screwdriver.

  3. 2KnaoVRq5gtqPSfL
    2KnaoVRq5gtqPSfL
    WaFRgGR1GNCf2LfQ

    • Unscrew the five 2.5mm screws on the back panel with a Phillips #00 screwdriver.

    • Remove the back panel by lifting it away with your hands.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Daniel Soski

Member since: 19/04/13

57 Reputation

0 comments