Disassembling the Inspiron 7359 2-in-1

Written By: meetkumar desai
  • Comments: 0
Disassembling the Inspiron 7359 2-in-1

Difficulty

Easy

Steps

4

Time Required

5 minutes

Introduction

This short guide will give step by step instructions on the removal of the bottom panel of the Inspiron 7359 2-in-1. This disassembly requires the use of a Phillips #0 screwdriver, and a spudger.

  1. l4Co2EBYK6xKAgfX

    • Turn off device before starting.

    • Turn the laptop upside down with the logo facing the surface of the table.

  2. VEbGwPaxwaaBdhbk
    VEbGwPaxwaaBdhbk
    5EGXbk2EIOB3GQcb

    • Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

  3. BUUdOGCwagFSTpVN

    • Use a spudger to separate the back cover from the laptop.

    • Start from one corner and work your way around the edge of the cover.

    • Be careful not to bend or crack the back cover.

  4. 6Rj2NW21VPs6qIX3

    • All hardware components should be exposed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

meetkumar desai

Member since: 08/10/17

330 Reputation

0 comments