Introduction
Tools
- 
                  
                  
- 
            
The four longer keys from the fingerboard are to be handled from the left side to get them off.
 - 
            
The eight smaller keys need to be levered from the bottom up.
 
 - 
            
 - 
                  
                  
- 
            
The scissor mechanism of the eight small keys are obstructing the underlying screws.
 - 
            
By using again an opening tool or opening pick these can be snapped off easily.
 
 - 
            
 - 
                  
                  
- 
            
Loosen those 12 screws with a Phillips #00 screwdriver.
 - 
            
Then just pull off the four rotary knobs and the volume knob.
 - 
            
Now it is possible to slightly lift the keyboard and set it back.
 
 - 
            
 - 
                  
                  
- 
            
Unlock the flex cables by pushing the two black nibs on both sides of each connector.
 - 
            
Now you can pull the flex cables out and remove the keyboard completely.
 
 - 
            
 - 
                  
                  
- 
            
Open the display cable connector by using a plastic opening tool to flip the latch upwards.
 - 
            
The display is held in place with a mild adhesive. A spudger helps you to get it free.
 - 
            
Now you can unplug the cable and take out the whole display.
 
 - 
            
 
To reassemble your device, follow these instructions in reverse order.