Introduction
Use this guide to repair the power supply with a Phillips head screwdriver, a wrench, and pliers. These tools will help secure the screw holding the wire.
Tools
- 
                  
                  - 
            Use Phillips head screwdriver and wrench to remove screw and nut securing the plastic bracket. 
 
- 
            
- 
                  
                  - 
            If the wire gets pulled out of the transformer, reinsert it. 
- 
            Use a small flathead screwdriver to secure the screw that holds the wire in place. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.