FlySky FS-TH9X Disassembly

Written By: Heath Soucheck
  • Comments: 0
FlySky FS-TH9X Disassembly

Difficulty

Easy

Steps

4

Time Required

1 minute

Introduction

To access and fix any damages with the FlySky FS-TH9X remote, the first step to disassemble the remote, is to remove the six screws in the back. Getting access into the internals of the remote. Using this guide you are able to complete your first steps to fixing your remote.

  1. smdCsCktuECcFPRb

    • On the back of the remote, you will see 6 5mm Phillips #2 head screws.

    • The six screws on the front of the remote are screws that disconnect the joysticks from the remote and cannot be used to remove the back panel.

  2. CNkZvlxoIpfgunBW

    • Using a size two Phillips screwdriver, remove the six 5 mm Phillips #2 head screws

  3. tQOMeSSNrXwYnPK4

    • Using a pry tool with a little pressure, carefully pull apart the remote to expose the inside.

  4. XU1bpkHfkrivbsKE

    • Continue to troubleshooting your device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Heath Soucheck

Member since: 09/02/23

715 Reputation

0 comments