FlySky FS-TH9X Joystick Replacement

Written By: Heath Soucheck
  • Comments: 0
FlySky FS-TH9X Joystick Replacement

Difficulty

Moderate

Steps

7

Time Required

10 minutes

Introduction

Over continued use, the joystick tends to move on it's own without you moving the joystick. This is fixable by replacing the entire joystick. This guide consist of the steps required to open the remote, dislocate the joysticks and than replacing said joysticks.

  1. smdCsCktuECcFPRb

    • On the back of the remote, you will see 6 5mm Phillips #2 head screws.

    • The six screws on the front of the remote are screws that disconnect the joysticks from the remote and cannot be used to remove the back panel.

  2. CNkZvlxoIpfgunBW

    • Using a size two Phillips screwdriver, remove the six 5 mm Phillips #2 head screws

  3. tQOMeSSNrXwYnPK4

    • Using a pry tool with a little pressure, carefully pull apart the remote to expose the inside.

  4. XU1bpkHfkrivbsKE

    • Continue to troubleshooting your device.

  5. w2MlYBYHZUPgRvO2

  6. RSMNxUDfhgajSDMw

    • Carefully remove chassis from outer casing.

  7. y2PGkrsuxlluPpcH

    • Gently remove wiring from circuit.

    • To replace this part please contact the manufacturer, or consult the internet, to purchase parts.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Heath Soucheck

Member since: 09/02/23

715 Reputation

0 comments