FlySky FS-TH9X Joystick too Loose or too Tight

Written By: Heath Soucheck
  • Comments: 0
FlySky FS-TH9X Joystick too Loose or too Tight

Difficulty

Moderate

Steps

6

Time Required

5 minutes

Introduction

Often with controls, the joystick that controls most movement can become loose or too tight. This is adjustable by design.

  1. smdCsCktuECcFPRb

    • On the back of the remote, you will see 6 5mm Phillips #2 head screws.

    • The six screws on the front of the remote are screws that disconnect the joysticks from the remote and cannot be used to remove the back panel.

  2. CNkZvlxoIpfgunBW

    • Using a size two Phillips screwdriver, remove the six 5 mm Phillips #2 head screws

  3. tQOMeSSNrXwYnPK4

    • Using a pry tool with a little pressure, carefully pull apart the remote to expose the inside.

  4. XU1bpkHfkrivbsKE

    • Continue to troubleshooting your device.

  5. EEoWdRwl2nAnPSPi

    • Referring to dissasembally guide open the remote to expose the inside

    • Once opened, locate the resistance plate that is highlighted

  6. RrxKEJh5qWwhHo4J

    • Tighten or loosen the highlighted screw to desired level of resistance.

Author

Heath Soucheck

Member since: 09/02/23

715 Reputation

0 comments