Garmin nuvi 2460 LMT Speaker Replacement

Written By: Ricardo Audain
  • Comments: 1
Garmin nuvi 2460 LMT Speaker Replacement

Difficulty

Easy

Steps

6

Time Required

No estimate

Introduction

  1. jiDeyFRGZsMbh5lI
    jiDeyFRGZsMbh5lI
    PSeOaJFyaLEXMTPW

    • Using a T5 Torx Screwdriver, begin unscrewing the four 11.0 mm screws from the back panel.

  2. AF2XconKP1klW6Pj

    • Using a plastic opening tool or similar object, find the groove in the side of the device and begin prying open the back panel. Work the tool around the entire panel until it pops off.

  3. hFo3bLF2nnTJDYKa

    • Lift the beige clamp using a tweezer or your fingernail and remove the connector.

  4. uGkWejwgYsQVfk46

    • Lift the connector gently from the socket, making sure you pull in the right direction.

  5. aNUfVmHuSpMQC4gT

    • Lift and separate the speaker connector cable using a pair of tweezers.

  6. txOUyKAljuJRTeZu

    • Gently lift the speaker out of the back cover using a plastic opening tool.

    • Apply force as needed if there is glue holding the speaker in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ricardo Audain

Member since: 07/09/16

647 Reputation

One comment

Where do I get the parts for the garmin nuvi 2460? I can’t find anything online or ebay. I need a speaker and a microphone replacements!

Mark Peterson -