HMDX Chill Disassembly

Written By: Jourdan Holubasch
  • Comments: 2
HMDX Chill Disassembly

Difficulty

Easy

Steps

3

Time Required

No estimate

Introduction

If your HMDX Chill is having any kind of issue this guide will show how to disassemble the device in order to begin the process of fixing your issues.

  1. TnKRyOvVfFRkVBUp
    TnKRyOvVfFRkVBUp
    qauVXHvCU5jBHe1h
    GcRLoLvFs2TUL4rM

    • Insert a metal spudger under the rubber base.

    • Pry the rubber base off.

  2. 5yZObJVXxJHVaqyC

    • Use a Phillips #1 screwdriver to remove four 9 mm screws from the base of the device.

  3. DWbpTLqxR13KVSsE
    DWbpTLqxR13KVSsE
    iQlrydWxMRSvWZEy

    • Grip the base of the HMDX Chill.

    • Pull the base upwards.

    I still need help here. Problem not fixed

    Lornejanes1@gmail.com

    Thank you

    Lorne Janes -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jourdan Holubasch

Member since: 31/03/16

754 Reputation

One comment

I have jam zero chill. One year old. Very very little use. Maybe 3 to 4 hours total.

Plug in to charge red light comes on solid and goes out in couple of hours. Then light flashes red and zero chill will not connect.

Thank you

Lorne Janes -