HP EliteBook 8470p Case/Service Cover Replacement

Written By: Owen Bangs
  • Comments: 0
HP EliteBook 8470p Case/Service Cover Replacement

Difficulty

Very easy

Steps

5

Time Required

25 seconds

Introduction

The service cover protects the internal components of the laptop. It also allows for easy access for servicing the internal components.

  1. AGJegcLp3GVOnnqf

    • Position the computer upside down with the opening latch facing away from you and the battery facing towards you.

    • If the battery is “swollen” or the shape is irregular, stop whatever you are doing and allow the battery to slowly discharge itself before removing it from the laptop casing. Click the link to learn how to replace and dispose of a “swollen” battery, What to do with a swollen battery.

  2. VoctAyKqe2QQMrsG

    • Slide the battery latch positioned to the right over to the right side. Hold it there.

  3. v3VAAsjodgt1kulF

    • With the latch opened, pull the battery out of its socket firmly.

    • There will likely be some resistance. However, if you find it to be excessive, the latch may not be properly opened.

  4. CsOfC3AoPtHgGWPg

    • With the laptop latch still facing away from you, slide the left release latch to the left.

    • Some models may have a screw installed on this latch, if so, be sure to remove it first to avoid damaging the latch.

  5. QQMlfccEUgCFUlBB
    QQMlfccEUgCFUlBB
    vtoJJbxw6Laueq6Q

    • Slide the door away from you, toward the opening latch.

    • Lift the door upwards away from the computer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Owen Bangs

Member since: 25/10/22

617 Reputation

0 comments