Introduction

If you are having audio issues with your laptop, you may need to replace the speaker. This guide details how to replace the speakers in an HP Envy TouchSmart m6-k025dx Sleekbook laptop.

  1. bYSD1YdPJUqLmHcF
    bYSD1YdPJUqLmHcF
    kStE11gMoWsLuwPw
    sMgwqgucDAKXlTIx
    • Flip the laptop over so that the backside of the laptop is facing upwards.

    • Use the Phillips #0 screwdriver to remove the twelve 5 mm screws that secure the bottom cover.

    • Insert a plastic opening tool into the opening between the bottom and top cover. Gently work your way around the perimeter of the case, and pry the two halves apart until the back cover is free from the laptop.

  2. C2httGwqy6jxUMRh
    C2httGwqy6jxUMRh
    ma1Llm4KyxIWYXyC
    • Remove the two 2 mm screws that secure the speaker.

  3. eGZhUAZVkmftYLi5
    eGZhUAZVkmftYLi5
    jTbmFopKCyl4uXfU
    oupIIhqEmfvQ5AWl
    • Using the tweezers, pull the black clip that is attached to the wires.

    • Pull the black connector completely free from the laptop, and remove the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Karlee Olson

Member since: 14/02/23

397 Reputation

0 comments