Introduction
This replacement guide is for the keyboard of the HP Envy x360 m6-w103dx. All you need to complete this guide is a plastic opening tool, a #0 Phillips screwdriver, and an anti-static wrist strap.
Wear the anti-static wrist strap and attach it to a metal surface to avoid damaging sensitive electrical components. Make sure the computer is unplugged and powered off before touching any internal parts.
Removing the keyboard is not dangerous and doesn’t require any special technical skills.
-
-
Unscrew the twelve 6 mm screws from the bottom of the laptop using a Phillips #0 screwdriver.
-
-
-
Open the laptop carefully, with the keyboard face up.
-
Pry around the outside of the keyboard with the plastic opening tool until the keyboard can be lifted slightly.
-
-
-
Lift the keyboard until you can see the cables connected to the motherboard.
-
Gently lift the tab on each ZIF connector that connects each cable to the motherboard using a spudger. Once each tab is flipped up, the corresponding ribbon cable will come out easily.
-
Detach the keyboard.
-
To reassemble your device, follow these instructions in reverse order.
