HP ProBook x360 11 G5 EE Keyboard Assembly Replacement

Written By: Kristen Gismondi
  • Comments: 1
HP ProBook x360 11 G5 EE Keyboard Assembly Replacement

Difficulty

Moderate

Steps

5

Time Required

No estimate

Introduction

  1. QEIOWsPCkDROf5QM
    QEIOWsPCkDROf5QM
    OX16UUCaX1WeBaDK
    2DYjVMSYnyqUauVH

    • Remove the 4.1 mm screws with a T5 Torx screwdriver.

    • Remove the 4.1 mm screws using a JIS #0 screwdriver.

  2. 255ayd2RgeXNpNJl

    • Use an opening pick to pry the corners of the keyboard deck.

  3. PgF6HxJPCtb1uDhw
    PgF6HxJPCtb1uDhw
    AZtYgHyrIVwadTIW
    6tftvJuTjRyU6OG4

    • Use an opening pick or opening tool to pry around the sides of the keyboard assembly.

  4. W5qnneYFDrJrGMQO
    W5qnneYFDrJrGMQO
    OqXBXGsQJggXi5Gh
    ZVIUeykZdRN3UXMA

    • Lift the keyboard assembly to expose two ribbon cables.

    • Lift the two plastic tabs that hold the cables in place on the motherboard

    • Slide the ribbon cables out of each connector.

  5. dLUm1qRNDq2VoFRk
    dLUm1qRNDq2VoFRk
    4d4MTWTHinrXuZoL

    • Remove the keyboard assembly from the rest of the computer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kristen Gismondi

Member since: 12/11/14

74428 Reputation

One comment

Merci pour ce tuto, je n'aurais pas su par quel bout le prendre ;)

Pour remplacer le clavier défectueux, il semble qu'il faille remplacer le top complet.

Lionel Faure -