Heyday Round Bluetooth Speaker Disassembly

Written By: Hunter Brown
  • Comments: 0
Heyday Round Bluetooth Speaker Disassembly

Difficulty

Easy

Steps

2

Time Required

10 - 20 minutes

Introduction

This is a step-by-step guide on how to disassemble a Heyday Round Bluetooth Speaker to reveal its inner components.

  1. rd2KGxJrfuQwZVHL
    rd2KGxJrfuQwZVHL
    2NCW11rUlnVsBYVo

    • Use a metal spudger to pry the fabric-covered top off of the speaker.

  2. senHcfHcErjecenC
    senHcfHcErjecenC
    XPt6uGAPeJpPLX5G
    DBCnuRQgPfnA6J2T

    • Use a Phillips #0 screwdriver to remove the twelve screws around the perimeter of the inner plastic shell.

    • Remove the inner shell from the back case.

    • Don't yank or pull the shell case off the bottom case. There are cables connecting the two and they could be damaged if pulled.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Hunter Brown

Member since: 22/09/22

185 Reputation

0 comments