Introduction

Have you ever opened a cabinet/dresser and noticed that the knob is wobbling out of place? This problem makes the knob difficult to grip enabling the access to what's behind the cabinet/dresser. Loose knobs are likely to eventually fall off drawers or cabinets. However, it can leave you in an inconvenient situation making it impossible to carry out daily tasks. With this guide I will provide descriptive instructions that will make your knob useful again.

  1. tANeqpdoVZPAdAOx
    tANeqpdoVZPAdAOx
    GTI5rCqZPaBZqgAc
    De42UKoCx1xZJCLh
    • Remove the drawer from the cabinet/dresser.

    • Do this so you have enough room to work with.

  2. kZsXB2WaPaUot6WJ
    kZsXB2WaPaUot6WJ
    ueMuqWEsePBPCDVB
    PqDKaBAQNgfCLHNJ
    • Take your screw driver to remove the screw from the knob.

    • Place the screwdriver on the screw turning the screwdriver counter clock wise to untighten the screw from the knob.

    • Knowing that every cabinet and drawers are different will determine how many screws you will need to untighten for this repair.

  3. F5axIxi2NMc6YCx6
    F5axIxi2NMc6YCx6
    WSToBbsAyCuQRTBX
    yhJIi5onRCMKMBYC
    • Next, you will then remove the screw from the desired hole.

  4. vpXhy4nITltoNCPU
    vpXhy4nITltoNCPU
    CwTHqnwWuBAYahnw
    • Inspect the threading of the screw to see whether the screw is still in good condition or if there is any jagged threading on the body portion of the screw.

    • If your screw does not appear to be in good condition, then you would have to purchase another screw. Remember to take the knob with you to the store so that you can get the correct screw for that knob.

  5. XIdOjj3sepxVixIg
    XIdOjj3sepxVixIg
    YjU2oOcrBB6n5wZW
    ohFmSBWVA1MmABja
    • Inspect the holes within the knob and drawer.

    • You would perform this step to see if there is any extra debris that was left behind.

  6. nRJ4R6CXS5CjXgcJ
    nRJ4R6CXS5CjXgcJ
    TCFr4sWQ5PRgTw36
    • Place washers on the screw.

  7. ZHGlRN5TC56EaBXN
    ZHGlRN5TC56EaBXN
    Sa6dBsACt116EGeS
    QFQPskwXwxTCWI34
    • Insert the screw in the desired hole.

  8. urwZy2HRqGNjeVJ6
    urwZy2HRqGNjeVJ6
    GAXLOaZEaXkRmwDW
    • Place the knob in front of the cabinet/drawer where the screw would be in place.

  9. wQfWSZLlO4fWRYPj
    wQfWSZLlO4fWRYPj
    rwaRWMhRTOIAwNsq
    22PCfng3gCWrkUkb
    • Hand tighten the screw on the knob.

    • Since you are holding the screw with your left hand and the knob with your right all you have to do is turn the screw clockwise, so the knob can tighten on the screw.

    • Make sure to hold the knob in place while performing this step.

  10. MKURTg5lIEidOLgJ
    MKURTg5lIEidOLgJ
    PWVVjLYKIOEfEJKY
    1Fyv4V5sFLuIMUTU
    • Use your screwdriver to finish tightening the screw in place.

    • Remember to keep the knob in place while completing this step.

  11. 5kTXUdoDwF1JhFxw
    5kTXUdoDwF1JhFxw
    SR62RsyUUZGWpBeT
    • Check to see if the knob is tight and secure.

  12. uNYGlaBV3EeV4sm2
    uNYGlaBV3EeV4sm2
    epMWaJmewEr2U45e
    qBMkBTRPtNw4QITk
    • Place the drawer back in the cabinet/dresser.

    • Congratulations! You fixed your loose cabinet knob.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sandra William

Member since: 16/01/19

241 Reputation

2 comments

Thanks Sandra. Appreciate all the photos as I really don’t know how to do many home repairs.

W. B. -

Another aspect of iFixit,

Home repair

Kind-hearted, spirited Man -