Introduction

Sometimes we may find the stickers on our cars unwanted. In this case, we would like to remove the stickers without damaging our beautiful car paint. In this guide, I will show you how to remove stickers from a car properly.

  1. xptjnrVj2YKeIPWc
    • First of all, find the area where the sticker is. In my case, it is on the car body near the fuel tank.

  2. ViP1riwMMDQxxNYH
    ViP1riwMMDQxxNYH
    TViUT1DDNcbMhdbM
    • Spray the area with some soap water or with cleaning sprays.

  3. UtOEYg2UBwEexUEV
    • Next, wipe the area thoroughly with a microfiber cleaning cloth.

  4. SXTZvRZcDmaqL3Vm
    SXTZvRZcDmaqL3Vm
    q2W1vqmtZ6XWnE12
    • Turn on the hairdryer and put it in its hot setting.

    • Start heating the sticker from a few inches away. Try to heat the sticker from the center outward.

    • This will soften the adhesive under the sticker and make the following steps much easier.

  5. PsMJxlADiGUmSKQy
    PsMJxlADiGUmSKQy
    oqnN265FhHPlMCYb
    ZVNwqI2URcNYNABY
    • Use a plastic card and try to scrape the sticker from the edges.

    • A plastic card can help you remove your unwanted stickers without damaging the paint.

    • If it doesn't work, try to repeat step 4 and then try again.

    • If you are working on a glass surface, use a razor blade instead of a plastic card! It may seem too much for the glass, but the glass is hard enough to use a razor blade on.

    • Be careful when using a razor blade!

  6. vCN6vkEXnyCEox2O
    vCN6vkEXnyCEox2O
    lIqSf1lqoKujRGQp
    • Finally, if there is any residue, heat the residue with the hairdryer and scrape it off with a plastic card or razor blade (depending on where the sticker is).

    • After removing all stickers and residue, use some detailing spray or cleaning spray to clean the area again and you are all set!

Conclusion

After these steps, you should have a clean surface without any residues!

Xuanfang Gao

Member since: 15/09/21

141 Reputation

0 comments