Introduction

This guide is an easy way to shorten the band of a wristwatch by removing the watch links. Watch bands are manufactured longer so they can be adjusted to your wrist size. You should complete this guide on a table or sturdy work surface. I recommend to save any watch links you remove from the watch just in case you need them in the future.

  1. ASYNusorFhSH1FUh
    • Open the watch band.

  2. VtoVAjgX1DiYFU1l
    • Find the arrows inside the band and place the watch so the arrows are facing down.

  3. vtBeYUxApQIOQRGO
    • Place a nail in the hole on the opposite side of the arrow.

    • Gently tap the nail into the hole with a small hammer.

  4. SKL4pupiJ5cAyFTI
    • Remove the pin from the hole of the watch link.

    • Remove the watch link.

  5. GmrZj61KajFvhidP
    GmrZj61KajFvhidP
    aOVAVVFkJbbIEtr4
    • Repeat Steps 3 and 4 until the watch band is the desired size.

  6. 1ZK4uDoEJSr3DRaj
    1ZK4uDoEJSr3DRaj
    DsEmLqORuQrKPEgq
    • Join the clock's bands and insert the pin in the same direction as the arrow until it is sealed.

Yedsmarie Pesante

Member since: 06/10/21

181 Reputation

0 comments