Introduction

If your Longwise ES06 electric scooter's stem/handle is shaky, follow this guide to tighten the stem so you're ready to ride again safely.

This guide focus on stabilizing the stem/handle of the scooter, restoring the full function of the electric scooter. Riding a scooter with a shaky stem can be dangerous to the rider and passersby because there's a greater chance of losing control if your scooter is loose at the stem.

Before beginning this guide, turn off the e-scooter and unplug it from the charger.

  1. slP1LmLnJpy4H5kh
    slP1LmLnJpy4H5kh
    51xyWYXBdwUfgGLX
    • Power off your E-Scooter and make sure it is not charging.

  2. Ux4k4IIbhDAd2tVa
    Ux4k4IIbhDAd2tVa
    S2lT4kYKchpJp4RZ
    • Slide the locking clip out from the base of the stem.

    • Unlock the clamp on the stem.

  3. 6c1YQoRhEuhH4SGU
    6c1YQoRhEuhH4SGU
    1SLIyumZfgFcVQ6t
    • Gently lower the stem onto the back wheel and keep it stable.

  4. wStaSVUueQkbiFN4
    wStaSVUueQkbiFN4
    gg1BFLg2IBCsxIoI
    BmVcUBWjGAOtuRmX
    • Using an adjustable wrench, carefully tighten the bolt at the base of the stem.

    • This will make the stem stable.

    • Do not use the wrench on the spring between the stem and the bolt as it may damage the wires beneath.

  5. Jhn2pyiDSetWVgqV
    Jhn2pyiDSetWVgqV
    TDFYXSHEHhGTXwid
    wmd1ec113lNZnBSI
    • Using a slotted/flathead screwdriver, carefully tighten the screw on the clamp.

    • This will prevent the clamp from popping open.

  6. i121PjSO4JIibCW3
    i121PjSO4JIibCW3
    YXQPSZK2CLflQn6Q
    • Use a Phillips #0 to tighten the screw on the locking clip.

    • This helps the clamp to stay in place and prevent it from popping open.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Maithili Admane

Member since: 24/09/22

133 Reputation

0 comments