How to change the grips on a golf club

Written By: Esteban Ortega
  • Comments: 1
How to change the grips on a golf club

Difficulty

Difficult

Steps

6

Time Required

10 - 15 minutes

Introduction

Are the grips on your golf clubs getting old? Are your grips not providing you with the grip you need to maximize your performance on the course? This guide will inform you step-by-step on how to change those old grips for new grips.

  1. BiGVXUGjYHttGMLE
    BiGVXUGjYHttGMLE
    c4SQGL3sLwNDWB6v

    • Tighten golf club on vice clamp. Align the golf club so that the club face is vertical.

    • Note: Make sure you place container underneath the grip to catch excess mineral spray in later steps.

  2. R3wNTLkvBmXLAEnJ
    R3wNTLkvBmXLAEnJ
    CeWCUXM3hmyxMPXP

    • With the xacto knife cut the old grip off of the club.

    • Remove grip from club.

  3. YOEAbvCXfqemJPfY
    YOEAbvCXfqemJPfY
    ZNHaN2CMSYBRnoPl

    • Measure the amount of double-sided tape necessary to cover the area of your grip.

    • Place the tape on the club so that it is centered and an extra inch comes off the end of the club.

  4. kiabSDbImXgeyUPd
    kiabSDbImXgeyUPd
    dPSV32FahvGEAFHb

    • Squirt mineral spirits on the tape.

    • Make sure you drench the tape in mineral spirits.

    • Note: it is safe to get mineral spirits on your skin, it is non-toxic.

  5. MrIFPX6oTHw31XAY
    MrIFPX6oTHw31XAY
    VdDTgKfdnHoYaqig
    D3aLIS5WOtkYu6r2

    • While the tape still has mineral spray on it, quickly slide the grip all the way down.

  6. hWGICGj6jWhwVWNG

    • Wait 1-2 hours for the mineral spray to dry.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Esteban Ortega

Member since: 10/04/15

147 Reputation

One comment

Muy bueno. Gracias

Matias Doro Altan -