How to verify Apple MagSafe Battery Pack firmware version

Written By: David Spalding

Comments: 1

How to verify Apple MagSafe Battery Pack firmware version

Difficulty

Very easy

Steps

Time Required

15 seconds

Introduction

The part number and firmware version of a MagSafe Battery Pack can be verified in iOS Settings. This is also a valid check for a genuine Apple product vice a counterfeit.

Step 1

Attach the MagSafe Battery Pack to the MagSafe location on the back of the iPhone.
The Apple logo on the MagSafe Battery Pack lines up with the Apple logo on your phone. This can help in positioning.
The LED indicator may glow green or amber depending upon the Battery Pack's charge condition.

The MagSafe Battery Pack and the MagSafe Leather Wallet With Find My Support (both Apple) are the same size. On the 14 Plus, the onscreen indicator when connecting either is the same size as the accessory.

Can anyone with another size of 12, 13, or 14 (non Plus or Pro Max size) test and confirm. Again, Either the Wallet or Battery Pack will do. (FYI, the paperwork insert with the Leather Wallet is the same outline as the devices.)

David Spalding -

Step 2

An onscreen toast will appear indicating the presence of the Battery Pack. The toast will indicate the following:
The charge level of the Battery Pack.
The charge level of the iPhone.
Indicate that the iPhone is accepting a charge.
Home screen widgets for Battery will indicate the charge level of the Battery Pack. The widget may also indicate if the Battery Pack is being charged (i.e. by cable, or by reverse charging).

Step 3

Open the Settings app.
Scroll down to General, and click it.
Find About, and click it.
Scroll down to the Wireless section with the MagSafe Battery Pack listed (iOS 16.5). Click it.
The model number and firmware version are displayed. Firmware 2.7.b.0 or later supported 7.5W wireless charging (unplugged).