Inspiron 7359 2-in-1 WiFi Card Replacement

Written By: Annberlisa Ronald
  • Comments: 0
Inspiron 7359 2-in-1 WiFi Card Replacement

Difficulty

Easy

Steps

5

Time Required

10 minutes

Introduction

  1. l4Co2EBYK6xKAgfX

    • Turn off device before starting.

    • Turn the laptop upside down with the logo facing the surface of the table.

  2. VEbGwPaxwaaBdhbk
    VEbGwPaxwaaBdhbk
    5EGXbk2EIOB3GQcb

    • Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

  3. BUUdOGCwagFSTpVN

    • Use a spudger to separate the back cover from the laptop.

    • Start from one corner and work your way around the edge of the cover.

    • Be careful not to bend or crack the back cover.

  4. 6Rj2NW21VPs6qIX3

    • All hardware components should be exposed.

  5. fHJNU3iMRDA5vUa6
    fHJNU3iMRDA5vUa6
    UGqfZ42Pa3a2IjDe

    • Use the spudger tool to remove the two antenna cables.

    • Remove the black screw.

    • Slightly pull up the end and remove the WiFi card. Be careful not to damage the internal adapter.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Annberlisa Ronald

Member since: 26/08/19

109 Reputation

0 comments