Lenovo IdeaPad Y700-15ACZ Display Replacement

Written By: Colin Burke
  • Comments: 0
Lenovo IdeaPad Y700-15ACZ Display Replacement

Difficulty

Moderate

Steps

4

Time Required

2 - 5 minutes

Introduction

This guide provides details on how to replace the display on a Lenovo IdeaPad Y700-15ACZ laptop. The Lenovo IdeaPad Y700-15ACZ uses a FHD 15.6" 1920x1080 display.

Before you begin, you will need a PH0 bit or screwdriver and the new display. This is a very fragile component, so exercise caution when disassembling the device. You may need this guide if your device is failing to display images on the screen, but audio and the device is still powered on.

  1. QYgNKxc14rMVsiXi
    QYgNKxc14rMVsiXi
    dfbtsFGlwBkt2RYd

    • Remove the border around the screen using a plastic opening tool.

    • When removing the border be careful, the plastic connectors can sometimes break under little amounts of pressure

  2. ZKMI1dHJpljUZCcg
    ZKMI1dHJpljUZCcg
    I3W2OC1eBpnrFPP1
    5SlSvbLDFNCtpDcM

    • Use a Phillips #0 screwdriver to remove the four screws that secure the display (one screw at each corner).

  3. 261owxJrLVcdjL1K
    261owxJrLVcdjL1K
    Y5vOu6Pk61BS1UYq

    • Before you remove or rotate the display, remove the cable connected to the display from the constraints.

  4. RkduIVmCOXAfCEwM
    RkduIVmCOXAfCEwM
    YXx1HrPGMqlsmJpG

    • Rotate the display face down.

    • From the sticker carefully peel down and remove the connection from the display.

    • Attach the ribbon to the new display.

Conclusion

Repeat steps backward to put the computer back together. After you have completed the reassembly, make sure to test the new display by powering on the device.

Author

Colin Burke

Member since: 28/03/23

109 Reputation

0 comments