Introduction

If you just can't find out what is wrong with your disco ball, you will probably need to open it to troubleshoot it. This guide will walk you through the steps to do that.

  1. FhjGNX2lBvwADUKG
    • Turn the device over so that the base is on top.

  2. GwdTEfKHTy2djhbI
    • Peel off the piece of metal that is glued to hold the two halves of the base together.

    • You may need rubber cement to reapply the piece of metal when reassembling the device.

  3. DldoLmME1QWelBjD
    DldoLmME1QWelBjD
    Kk6hCiIxmtvUVLv1
    • Unscrew the four 10mm Phillips head screws on the bottom of the device.

    • Once the base is removed, the device should look as shown on the picture.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nick Kaprielian

Member since: 14/01/14

525 Reputation

0 comments