MacBook Pro 17" Unibody Clutch Cover Replacement

Written By: Brett Hartt
  • Comments: 2
MacBook Pro 17" Unibody Clutch Cover Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

  1. 6bJ3JDHKPCaPQ54r
    6bJ3JDHKPCaPQ54r
    4hQWlunhAkhGcuhG

    • Holding the clutch cover firmly, slide it towards the right display hinge.

    • The clutch cover will move approximately 1 cm to the right. Do not force it pass this point.

  2. SrPkJce33kIYr1Tu
    SrPkJce33kIYr1Tu
    LBnNnd6stTIQOvdP

    • Lifting the left edge of the clutch cover, gently rock it back and forth on its long axis while pulling it away from the display.

    • Remove the clutch cover from the display, minding any cables that may get caught.

    How the he'll do I get it back on?

    liam Carroll -

    How the he'll do you get the cover back on?

    liam Carroll -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Brett Hartt

Member since: 13/04/10

126474 Reputation

0 comments