Introduction
Hello! In this repair guide you will learn how to replace a Midland WR-120 EZ antenna. Let's get started!
Tools
-
-
Locate the antenna mount and remove the screw using a Phillips #1 screwdriver. After, pull the old antenna out.
-
Unless you want to keep the old screw and copper washers for spares, don't worry about them. New ones come with the replacement antenna.
-
-
-
Use something like a pick to arrange the copper washers so that the screw can pass through.
-
Put the screw in through the indented side of the mount and screw it in.
-
-
-
If you receive a weather forecast from your radio, then you have properly installed a new antenna!
-
Conclusion
And with that, your WR-120's antenna should be working properly!
