Milwaukee 2704-20 Chuck Replacement

Written By: Unique Linnell
  • Comments: 0
Milwaukee 2704-20 Chuck Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

  1. aBVbfffMVwjcQtft
    aBVbfffMVwjcQtft
    OE1jQ1mXdGIMySKG
    SIo2migFpfEyOlFy

    • Rotate the chuck counterclockwise until it stops rotating.

    • Inside the chuck, the “chuck screw” (M8.0 x 1 LH T-40 Chuck Screw) should now be revealed.

  2. xeSWgKbe3CchiTWj
    xeSWgKbe3CchiTWj
    aJxFKq5tG3CHxFir

    • Insert a 10 mm Allen wrench bit into your screwdriver body.

    • Remove the chuck screw by rotating Allen wrench counter-clockwise.

    • When rotating the Allen wrench in the chuck, there may be a clicking noise. This is perfectly normal.

  3. dcExSenxvl1KwCcC

    • Pull the chuck in the direction indicated.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Unique Linnell

Member since: 13/03/23

409 Reputation

0 comments