Nokero SunRay Pro Power Panel Front and Back Case Replacement

Written By: Jeremy
  • Comments: 0
Nokero SunRay Pro Power Panel Front and Back Case Replacement

Difficulty

Easy

Steps

4

Time Required

5 minutes

Introduction

Removing the front and back case will allow you access to other parts of this device.

  1. kISQlDUTpeYK6o6K

    • Turn over the device so that the back of the device is facing up.

  2. N3rDMCDjgdWi4OHP
    N3rDMCDjgdWi4OHP
    WKxcjV1U62LlvuF1
    Uhrb2ZlEXeo6WT4E

    • Insert the first plastic opening tool along the side to pry open the case.

    • Sliding the plastic opening tool, while inserted, along the seam may help the removal process.

    • Use a second plastic opening tool to help separate the remaining seams.

  3. g3KxPIHIyIS6EW4k
    g3KxPIHIyIS6EW4k
    mEtnUHEdUsLVPmFV

    • There is a long strip of double sided adhesive foam tape that prevents the back case from easily being removed.

    • Pull the back case off by applying steady pressure to remove it from the adhesive foam tape.

  4. HIpvhWIZG1QlVfeM
    HIpvhWIZG1QlVfeM
    MIqRIBM54Cq3th5G

    • Use the Phillips precision screwdriver to unscrew the two 5.0 mm Phillips screws from the circuit board.

    • Remove the solar panel and circuit board from the front case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jeremy

Member since: 22/01/15

157 Reputation

0 comments