PowerA Enhanced Wireless Controller L and R buttons Replacement

Written By: Ayjah Montgomery
  • Comments: 2
PowerA Enhanced Wireless Controller L and R buttons Replacement

Difficulty

Moderate

Steps

6

Time Required

5 - 10 minutes

Introduction

This guide will show you how to access and replace the L and R buttons of your PowerA Enhanced Wireless Controller. If you need to clean any residue from the L and R button area, removing them will help you do so.

  1. 1D1TIShfjTbDYKWl
    1D1TIShfjTbDYKWl
    vSbNxm4txNUOJW2G
    1GuRcPtBLLwIeb1M

    • Remove the battery cover by pressing down on the lever located on the top of the cover.

    • Apply pressure until it clicks out of place, and pull it off.

  2. wUMMQTYEsoRhTS2j

    • Remove all eight screws using the J0 screwdriver.

  3. NwcZTVUPBiBDxOeE
    NwcZTVUPBiBDxOeE
    31C6NXPUXSHQQwmM

    • Insert the iFixit opening tool into the seam and gently pry the cover plate up.

    • Remove the cover plate once it is loosened.

  4. EFHFICKyRjFdcTEs
    EFHFICKyRjFdcTEs
    leIIPDY1FOAyWeK1
    SwEMeikPShDDfwPY

    • Remove all three screws securing the motherboard using the J00 screwdriver.

    • Remove the motherboard.

  5. 1nquFH2XWfkHKFdT
    1nquFH2XWfkHKFdT
    MYoWQXiVebT36IDQ
    aJOUQTvZCusWMZTe

    • Lift the two white latches using the iFixit opening tool.

    • Lift the white covering off.

  6. nCkcIWPiZDS5nSD5
    nCkcIWPiZDS5nSD5
    53MlLeManNThpaEL
    BFBRNJ3nVPXKAvsE

    • Squeeze the buttons with rubber tweezers and push them in.

    • Grab it from the back and pull it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ayjah Montgomery

Member since: 10/10/19

388 Reputation

2 comments

I need to know how to fix the ZR and the ZL buttons, like a faster response time

Starry Milligan -

im sure this would be really helpful if i knew where i could buy the parts?

arch1e b -