PowerBook G4 Titanium Onyx Lower Case Replacement

Written By: iRobot
  • Comments: 0
PowerBook G4 Titanium Onyx Lower Case Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

The bottom case slides off easily after removing a few T8 Torx screws.

    • Turn the G4 over.

    • Remove the eight T8 Torx screws from the lower case.

  2. 3KYExhddvMEhwaoK

    • Using your thumbs, slide the lower case away from you.

    • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

  3. Zek6mWyNbNXhBOuL

    • Your laptop should look approximately like this.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

iRobot

Member since: 25/09/09

0 Reputation

0 comments