Introduction
A missing or broken pull on a zipper can make life difficult when you try to open and close your Patagonia jacket. This guide will show you a quick-fix method you can use in the field or as an interim solution until you can replace your slider. Don't have a zipper pull? A loop of very thin cord or string will not only work, but make MacGuyver proud.
For replacement parts or further assistance, contact Patagonia Customer Service.
Parts
-
-
Grab your zipper pull.
-
Thread the cord of the zipper pull through the hole on the slider where the pull used to be.
-
-
-
Make a loop with the cord that has passed through the hole.
-
Feed the rubber end through the loop.
-
