Reliance Furnace 1910724 Filter Replacement

Written By: Aniqa Ashfaq
  • Comments: 0
Reliance Furnace 1910724 Filter Replacement

Difficulty

Very easy

Steps

6

Time Required

10 - 15 minutes

Introduction

  • Changing the furnace filter is a simple and important task that should be done regularly to ensure the proper functioning of your heating system. The manufacturer for Furnace is Reliance and Equipment number 1910724.
  • Materials needed:
    • New furnace filter (make sure it is the correct size for your furnace)
    • Gloves (optional)

  1. RYoMBLFhSTp5uI3F

    • Turn off your furnace to ensure your safety while changing the filter.

  2. CLcxkvChLRXTDQbx

    • The furnace filter usually exists in the blower compartment or in the air duct leading to the blower.

  3. XqIDAXhLgGs5G3U2

    • Once you have found the filter placement on your model which is in lower compartment of furnace, remove the old one by sliding it out of the slot or unscrewing the cover.

  4. lNcNrvEibhC5TNBV

    • Dispose of the old filter in a plastic bag to prevent dust and debris from spreading.

  5. nRhufWyimFw1jZFi

    • Take the new filter and slide it into the slot or attach it to the cover.

    • Make sure the arrows on the filter are pointing in the direction of the air flow. If the filter is not installed correctly, it may not function properly and could damage your furnace.

  6. SnangloGrRDPXtLS

    • Set reminder on phone or write on calendar for filter change. Furnace filters should be changed every 1-3 months, depending on usage. Set a reminder for yourself to check and change the filter regularly.

Conclusion

Enjoy the clean air!

Author

Aniqa Ashfaq

Member since: 16/01/23

133 Reputation

0 comments