Replacing a Zipper Pull Tab on your Patagonia Jacket

Written By: Brittany McCrigler
  • Comments: 1
Replacing a Zipper Pull Tab on your Patagonia Jacket

Difficulty

Very easy

Steps

5

Time Required

5 minutes

Introduction

External content

Zipper pull replacement overview.

Make it easier to zip up your favorite jacket by replacing a missing zipper pull tab. It only takes a few minutes and afterward you’ll be able to grib your zipper pull with mittens or gloves.

For replacement parts or further assistance, contact Patagonia Customer Service.

  1. jA3FnPVsZWPWFv1o
    jA3FnPVsZWPWFv1o
    cUVs2vBWL3XZcZeK

    • Get your new zipper pull and position it with the pull-tab down.

    • Lift up the zipper, as if you were pulling the zipper closed.

  2. acjqyhXNMWXDScLt
    acjqyhXNMWXDScLt
    EAB1PGA6S2JKuTRt
    rqQeXPWIOVijDUrl

    • Insert the zipper pull into the smaller hole in the zipper. This is the top hole when the zipper is hanging normally.

    • Pull the zipper pull through the smaller hole.

  3. 3qdT5sm2OX5AfP6n
    3qdT5sm2OX5AfP6n
    DGVrS4Njw4es4KwL

    • Rest the zipper back in its normal, hanging position.

    • Take top end of the zipper pull and insert it into the bigger, lower hole in the zipper.

  4. d42xNl2qKZA2xJrh
    d42xNl2qKZA2xJrh
    IUxegfvKth4hslZc

    • Pull the top of the zipper pull through the hole to create a loop on the backside of the zipper.

    • Bring the zipper pull-tab through the loop.

  5. stj11nIoUFfddtdx
    stj11nIoUFfddtdx
    sDUhaPoonkmSPEFi

    • Pull the zipper pull-tab snug.

    • The zipper pull should now be inserted and lay flat.

Author

Brittany McCrigler

Member since: 05/03/12

88291 Reputation

One comment

Awesome! Thanks for the training!

Kathleen Hutton -