Ring Video Doorbell Pro Speaker Replacement

Written By: Jake Dixon
  • Comments: 8
Ring Video Doorbell Pro Speaker Replacement

Difficulty

Moderate

Steps

9

Time Required

5 - 25 minutes

Introduction

This guide will explain step-by-step how to replace the speaker in a Ring Video Doorbell Pro.

  1. WcIo54MnAwJOQBAY

    • Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.

  2. MtOksEuZgfVPrR4Y
    MtOksEuZgfVPrR4Y
    kdja4txUEQbLRA2T
    Rb622WQhCSUFfV4R

    • Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.

  3. vO2P5MoljvUAQgX2

    • Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.

  4. 4ZbiW21kYyGGSak3
    4ZbiW21kYyGGSak3
    IgsYhp6AgPuQeHJM

    • Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.

  5. mrNTrw46qNbj1vuU

    • Remove the front of the device from the back plate.

  6. 21PUXvPOg2NokUK1

    • With the Video Doorbell Pro opened up the speaker is exposed.

  7. UvEjxT5qWSggqGdX

    • Remove this 5.25 mm screw.

  8. EwksrqMe3yyOU5Uq

    • Remove this wire connection by gently prying it off with a plastic pry tool.

  9. gqSZAlEI34joD41A

    • Remove the speaker from the device.

    What is the model number of the speaker

    Sammy De Maertelaere -

Conclusion

To reassemble your device, insert the new speaker and follow these instructions in reverse order.

Author

Jake Dixon

Member since: 09/11/17

835 Reputation

7 comments

Hi Jake. This looks brilliant - I would love to contact you directly as I have a further question about this. My member name is robinfeild, and my email is email is robinfeild@gmail.com.

Hope to hear from you!

Thanks

Robin

Robin Feild -

Anyone happen to know where you can purchase the replacement speaker from?

John Clark -

Where did you get a replacement speaker from?

Volodymyr Kazantsev -

Where did you get a replacement speaker from?

Sammy -

I dismantled the speaker in mine having verified it was faulty by testing it with one from a standard Ring Doorbell, (It has the same connector but the housing is a different shape. Having cracked open the plastic housing of the speaker it has one of these inside (1w 8 Ohm Rectangular speaker 15*11*3.5mm) such as https://www.ebay.co.uk/itm/224485373996 a couple of drops of superglue and two dabs of solder, works like new.

cagedbat -

Where did you get a replacement speaker from ?

pascal.gohin77 -

Hi jake where did u get the speaker from? Can you send link please, need speaker for ring doorbell 3 plus!

pamela.morris32 -