Introduction

If your Singing Machine Shine Duets karaoke machine's LED lights are not functioning on one or more sides, access the LED board and motherboard by following our guide. Because the LED board needs to be connected to the device by pins and a screw, you will need to attach/reattach it using our guide. This repair is not particularly difficult, but it will require some relatively forceful part separation, so be careful and methodical.

  1. IQQYs3EVYMBIWTfb
    IQQYs3EVYMBIWTfb
    UeMI3G2LFA5htPxZ
    15ILYQOZ2s63wkYN
    • Remove the 10 mm screws on either side of the machine using a Phillips #1 screwdriver.

  2. C5TcCCIa2qUIVHtA
    C5TcCCIa2qUIVHtA
    N3Ejnw4RsC3V2BIe
    fohHTZhrR5xyGGBr
    • Remove the three 8 mm screws with a Phillips #0 screwdriver.

  3. du2nDfWCAQ4cfRoR
    du2nDfWCAQ4cfRoR
    F1i4OXMRfYXjYDVS
    AofpIqDeTF2JVjaY
    • Use the opening tool or your hands to carefully pry open the now-loosened top panel.

    • The top portion of the shell is open, and the inside of the device is now accessible.

  4. BakE4Am6BvdJx5TQ
    BakE4Am6BvdJx5TQ
    xxd3JVdKmlHkvEWh
    vU1gO4JrxdMtAmDP
    • Remove the 10 mm screw from the LED lightboard using a Phillips #0 screwdriver.

  5. THXHccF2BQpqkTUI
    THXHccF2BQpqkTUI
    ldrNe6MrAhuPjB5M
    xSiOnarkgOADoCC2
    • Carefully remove the lightboard from the device, taking care not to damage any pins.

    • To reassemble, connect the pins on the lightboard to the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ethan Dodson

Member since: 09/02/23

533 Reputation

0 comments